Shire Arbour 6ft (pressure-treated)

Description

Shire Arbour (pressure-treated)

The Shire Arbour is a beautiful, romantic open-sided gazebo. The curved roof timbers will help to create an elegant centrepiece in the best of gardens allowing you to enjoy the sun and your garden without feeling trapped in. The Shire pressure-treated arbour is available in 1 size only; 6×7, and has been manufactured from smooth planed white pine from sustainable forests. It is made entirely from tongue and groove timber and it comes pre-treated with long lasting pressure-treated preservative. NO additional painting is required!

Features

• FREE delivery*
• Manufacturers 10-year guarantee
• Low maintenance
• Pressure-treated preservative
• Wide panoramic views
• Moulded half-height balustrades
• 12mm tongue and groove walls, roof and floor
• Modular construction
• Straightforward DIY assembly

Quality Construction

The Shire Hexagonal Arbour is manufactured with 35 x 35mm framing. It comes with 12mm thick tongue & groove cladding on the walls, roof and floor. The arbour is made entirely using pressure-impregnated timber and does not require painting.

Pressure-treated Preservative

This Shire garden building range is supplied pre-treated inside and out with a quality, pressure-impregnated preservative.

Doors and Locking System

No doors or locks are applicable to this building.

Straight-forward Assembly

These buildings are supplied in a flat-pack modular design with smaller panels allowing for easy transportation through your house or garage!  Assembly is straight-forward for the competent DIY’er, and no professional experience is necessary. Normally 2 people can usually complete the job in 1-2 hours.

Please contact us prior to purchase if you have any queries regarding the dimensions. Information shown above has been supplied by the manufacturer, and is as accurate as possible (errors and omissions excepted), however it is intended only as a guide. We recommend that you install the building on a solid, free-draining base, with at least 60cm free space all around for maintenance and to avoid splashback. You should treat all sections with a high quality, spirit-based preservative prior to assembly, and subsequently every year in accordance with the manufacturers instructions. Please ensure that regular general maintenance is carried out on all moving parts, and that the roofing felt is regularly inspected, and replaced if required.