Shire Maulden Log Cabin

Description

Shire Maulden Log Cabin with Verandah

The Shire Maulden is manufactured from smooth planed white pine from sustainable forest, and is supplied untreated, therefore to ensure a long life, a weatherproofing preservative topcoat will be required immediately. One large opening glass window is supplied, and it can be fitted to either side of the door. A three-quarter glazed single door is supplied with a mortice lock for security, and lever handles for convenience. Heavy duty pressure-treated floor bearers are supplied for peace of mind. The Maulden is available in 3x sizes 7×10, 8×11 and 9×12, all including a 3ft verandah terrace.

Features

• FREE delivery*
• High quality slow-growing Scandinavian timber
• 19mm thick interlocking wall boards
• Verandah terrace
• Manufacturers limited 10-year guarantee
• Three-quarter glazed single door c/w mortice lock & lever handles
• Large opening glass window
• Heavy Duty 38kg mineral roofing felt
• Tongue and groove roof and floor
• Heavy duty (34x62mm), pressure-treated floor bearers
• Straightforward DIY assembly

Quality Construction

The Shire Maulden Log Cabin is manufactured with 19mm thick tongue & groove cladding on the walls, and 10mm t&g floor AND roof. One opening window is supplied, and it can be positioned either side of the door. This log cabin is supplied with heavy-duty, 34x62mm pressure-treated under-floor bearers as standard. The verandah terrace is approximately 900mm deep.

Only the best timber is used by Shire for production of their Log Cabins. Timber is imported from Russia and Sweden where trees are grown very slowly, resulting in the best material with less branches and therefore few knots. The timber is milled at Shire’s mill in Wisbech which means Shire are able to quality control timber from start to finished product.

Preservative

The Shire Log Cabin range is supplied un-treated, ready to accept any preservative colour of your choice.

Doors and Locking System

A wide, single, three-quarter glazed door (770mm wide) is supplied, complete with an internal mortice lock for security. A lever handle is also supplied for your convenience.

Straight-forward Assembly

These buildings are supplied in a flat-pack design with smaller pieces allowing for easy transportation through your house or garage!  Assembly is straight-forward for the competent DIY’er, and no professional experience is necessary. Normally 2 people can usually complete the job in a few hours.

Please contact us prior to purchase if you have any queries regarding the dimensions. Information shown above has been supplied by the manufacturer, and is as accurate as possible (errors and omissions excepted), however it is intended only as a guide. We recommend that you install the building on a solid, free-draining base, with at least 60cm free space all around for maintenance and to avoid splashback. You should treat all sections with a high quality, spirit-based preservative prior to assembly, and subsequently every year in accordance with the manufacturers instructions. Please ensure that regular general maintenance is carried out on all moving parts, and that the roofing felt is regularly inspected, and replaced if required.