Shire Overlap 6x4 Value Apex Shed (Single Door)

Description

Shire Overlap 6×4 Value Apex Shed (single door)

The Shire Overlap 6×4 Value Apex Shed with Single Door, is one of the best value budget garden sheds available in the UK today.

It has been manufactured using rustic overlap white pine from sustainable forests, and is available in 1 size only; 6×4, which is pre-treated with a mould-resistant, anti-fungicidal basecoat, however to ensure a long life a weatherproofing preservative topcoat will be required.

Mineral roofing felt, single door and a fixed glass window are all included as standard. The window panel is interchangeable, and it can be placed on either side of the building.

Features

• FREE delivery*
• FREE anti-fungicidal mould-resistant basecoat
• Available with or without a fixed window
• Manufacturers limited 10-year guarantee
• Optional pressure-treated building base c/w metal spikes
• Mineral roofing felt
• 127x6mm overlap walls
• OSB roof and floor
• Single door
• Ready to accept padlock (not supplied)
• Modular construction
• Straightforward DIY assembly

Basic Construction

The Shire Overlap 6×4 Value Apex Shed is a budget shed, therefore the quality isn’t as high as shiplap models, however it is manufactured with 34x34mm framing which is much heavier than most buildings of this type.

It comes with rustic overlap timber walls, with an 11mm solid sheet OSB floor and 8mm OSB floor. One fixed side window is supplied as standard, and it can be fitted to either side.

Preservative

All sheds in the Shire garden building range are supplied pre-treated inside and out with a quality, water-based, non-toxic, anti-fungicidal base coat. This ensures that your garden building is ready to accept any preservative colour of your choice. A factory-applied preservative topcoat is also available, however this is not a decorative finish.

Doors and Locking System

A single door 650mm wide is supplied with a hasp & staple ready to accept a padlock (not supplied).

Straight-forward Assembly

These buildings are supplied in a flat-pack modular design with smaller panels allowing for easy transportation through your house or garage!  Assembly is straight-forward for the competent DIY’er, and no professional experience is necessary. Normally 2 people can usually complete the job in 2-4 hours.

Please contact us prior to purchase if you have any queries regarding the dimensions. Information shown above has been supplied by the manufacturer, and is as accurate as possible (errors and omissions excepted), however it is intended only as a guide.

We recommend that you install the building on a solid, free-draining base, with at least 60cm free space all around for maintenance and to avoid splashback. You should treat all sections with a high quality, spirit-based preservative prior to assembly, and subsequently every year in accordance with the manufacturers instructions.

Please ensure that regular general maintenance is carried out on all moving parts, and that the roofing felt is regularly inspected, and replaced if required.