Shire Apex Bike Store 7x3 (overlap)

Description

Shire Overlap 7×3 Bike Store (no floor)

The Shire 7×3 Overlap Bike Store is a great value-for-money storage shed. It provides a useful extra space for bikes, however could also be used for toys, garden furniture, or tools. It has been manufactured using overlap white pine from sustainable forests, and comes with an apex roof and no floor. The timber is pre-treated with a mould-resistant, anti-fungicidal basecoat, however to ensure a long life a weatherproofing preservative topcoat will be required. Mineral roofing felt and a galvanised padbolt are included as standard. The Shire Overlap Bike Store Shed is manufactured with 6mm overlap boarding on the walls, 34x34mm framing and a solid sheet 8mm OSB roof.

Features

• FREE delivery*
• FREE anti-fungicidal mould-resistant basecoat
• Manufacturers limited 10-year guarantee
• Factory applied preservative top-coat option
• Mineral roofing felt
• Overlap walls
• OSB roof
• No floor
• Double doors
• Ready to accept padlock (not supplied)
• Modular construction
• Straightforward DIY assembly

Basic Construction

The Shire Gardenstore Shed is manufactured with 34 x 34mm framing. It comes with 6mm thick overlap boarding on the walls, with an 8mm solid sheet OSB roof, therefore the quality isn’t great. No floor or window is supplied with this shed.

Preservative

All sheds in the Shire garden building range are supplied pre-treated with a high quality, water-based, non-toxic anti-fungicidal basecoat. This ensures that your garden building is ready to accept any preservative colour of your choice. A factory-applied preservative topcoat is also available, however this is not a decorative finish.

Doors and Locking System

Double doors (1990mm wide) are supplied on this model with a padbolt ready to accept a padlock (not supplied).

Straight-forward Assembly

These buildings are supplied in a flat-pack modular design with smaller panels allowing for easy transportation through your house or garage!  Assembly is straight-forward for the competent DIY’er, and no professional experience is necessary. Normally 2 people can usually complete the job in 2-4 hours.

Please contact us prior to purchase if you have any queries regarding the dimensions. Information shown above has been supplied by the manufacturer, and is as accurate as possible (errors and omissions excepted), however it is intended only as a guide. We recommend that you install the building on a solid, free-draining base, with at least 60cm free space all around for maintenance and to avoid splashback. You should treat all sections with a high quality, spirit-based preservative prior to assembly, and subsequently every year in accordance with the manufacturers instructions. Please ensure that regular general maintenance is carried out on all moving parts, and that the roofing felt is regularly inspected, and replaced if required.