Shire Corner 7x7 Shed

Description

Shire Corner 7×7 Shed

The Shire Corner Shed 7×7 makes the best use of any corner in your garden, allowing ample space for storage, work or both. It comes with 2 opening windows, double doors, and is pre-treated with a mould resistant, anti-fungicidal basecoat, however to ensure a long lfe, a weatherproof preservative topcoat will be required. The Shire Corner Shed is available in 2 sizes – 7×7 and 8×8. It has been manufactured using smooth planed white pine from sustainable forests.

Features

• FREE delivery*
• FREE anti-fungicidal mould-resistant basecoat
• FREE opening glass window
• Manufacturers limited 10-year guarantee
• Professional installation available
• Factory applied preservative top-coat option
• Mineral roofing felt
• 12mm tongue and groove walls and floor
• Double doors
• Ready to accept padlock (not supplied)
• Modular construction
• Straightforward DIY assembly

Quality Construction

The Shire Corner Shed is manufactured with 34 x 34mm framing. It comes with 12mm thick tongue & groove cladding on the walls and floor, with an 11mm solid sheet OSB roof. Two opening windows are supplied as standard.

Preservative

All sheds in the Shire garden building range are supplied pre-treated with a high quality, water-based, non-toxic anti-fungicidal basecoat. This ensures that your garden building is ready to accept any preservative colour of your choice. A factory-applied preservative topcoat is also available, however this is not a decorative finish.

Doors and Locking System

A double door 1350mm wide is supplied with a padbolt ready to accept a padlock (not supplied).

Straight-forward Assembly

These buildings are supplied in a flat-pack modular design with smaller panels allowing for easy transportation through your house or garage!  Assembly is straight-forward for the competent DIY’er, and no professional experience is necessary. Normally 2 people can usually complete the job in 2-4 hours.

Please contact us prior to purchase if you have any queries regarding the dimensions. Information shown above has been supplied by the manufacturer, and is as accurate as possible (errors and omissions excepted), however it is intended only as a guide. We recommend that you install the building on a solid, free-draining base, with at least 60cm free space all around for maintenance and to avoid splashback. You should treat all sections with a high quality, spirit-based preservative prior to assembly, and subsequently every year in accordance with the manufacturers instructions. Please ensure that regular general maintenance is carried out on all moving parts, and that the roofing felt is regularly inspected, and replaced if required.