Shire Jersey 13x7 Shed

Description

Shire Jersey Apex 13×7 Shed

The Jersey Apex Shed is one of the best value-for-money garden sheds available in the UK today. It is big enough for a ride-on mower and other essential garden tools. It has been manufactured using smooth planed white pine from sustainable forests, and is available in 1 size; 13×7, and it comes with a mould-resistant, anti-fungicidal basecoat, however to ensure a long life a weatherproofing preservative topcoat will be required. Mineral roofing felt, a 12″ roof overhang, double doors and 3 opening glass windows are all included as standard. Our Jersey Shed is manufactured with 12mm shiplap weatherboarding on the walls, 12mm t&g timber floor, 35x35mm framing, 11mm OSB roof, and an opening mortice & tenon window as standard. The opening windows can be placed on either side of the building.

Features

• FREE delivery*
• Anti-fungicidal mould-resistant basecoat
• Pressure-treated timber option
• Manufacturers limited 10-year guarantee
• 3x opening glass window
• Professional installation available
• Mineral roofing felt
• 12mm tongue and groove walls and floor
• Double doors
• Ready to accept padlock (not supplied)
• Modular construction
• Straightforward DIY assembly

Quality Construction

The Shire Jersey Garden Shed is manufactured with 35 x 35mm framing. It comes with 12mm thick tongue & groove cladding on the walls and floor, with an 11mm solid sheet OSB roof. Three opening side windows are supplied as standard.

Preservative

All sheds in the Shire garden building range are supplied pre-treated with a high quality, water-based, non-toxic anti-fungicidal basecoat. This ensures that your garden building is ready to accept any preservative colour of your choice. A factory-applied preservative topcoat is also available, however this is not a decorative finish. This building is also available in pressure-treated timber.

Doors and Locking System

A double-door 1360mm wide is supplied with a padbolt ready to accept a padlock (not supplied).

Straight-forward Assembly

These buildings are supplied in a flat-pack modular design with smaller panels allowing for easy transportation through your house or garage!  Assembly is straight-forward for the competent DIY’er, and no professional experience is necessary. Normally 2 people can usually complete the job in 2-4 hours.

Please contact us prior to purchase if you have any queries regarding the dimensions. Information shown above has been supplied by the manufacturer, and is as accurate as possible (errors and omissions excepted), however it is intended only as a guide. We recommend that you install the building on a solid, free-draining base, with at least 60cm free space all around for maintenance and to avoid splashback. You should treat all sections with a high quality, spirit-based preservative prior to assembly, and subsequently every year in accordance with the manufacturers instructions. Please ensure that regular general maintenance is carried out on all moving parts, and that the roofing felt is regularly inspected, and replaced if required.