SHIRE™ DELIVERY: 7-14 days*

The current delivery time for most Shire™ buildings is *7-14 days, but it can be longer depending upon the model.

Please click here for the latest stock updates and delivery times for each model in the Shire™ range.

Shire Overlap 7x5 Value Apex Shed (Single Door)


The Shire Overlap 7x5 Value Apex Shed with Single Door, is one of the best value, budget garden sheds available in the UK today.

You can maximize your available space with this well proportioned building, and the door can be fitted to either end. Supplied with or without windows.


Shire Overlap 7×5 Value Apex Shed (single door)

The Shire Overlap 7×5 Value Apex Shed with Single Door, is one of the best value budget garden sheds available in the UK today.

It has been manufactured using rustic overlap white pine from sustainable forests, and is available in 1 size only; 7×5, which is pre-treated with a mould-resistant, anti-fungicidal basecoat, however to ensure a long life a weatherproofing preservative topcoat will be required.

Mineral roofing felt, single door and a fixed styrene window are all included as standard. The window panel is interchangeable, and it can be placed on either side of the building.


  • FREE delivery*
  • FREE anti-fungicidal mould-resistant basecoat
  • Available with or without windows
  • Manufacturers limited 10-year guarantee
  • Optional pressure-treated building base c/w metal spikes
  • Mineral roofing felt
  • 127x6mm overlap walls
  • OSB roof and floor
  • Single door
  • Ready to accept padlock (not supplied)
  • Modular construction
  • Straightforward DIY assembly

Basic Construction

The Shire Overlap 7×5 Value Apex Shed is a budget shed, therefore the quality isn’t great, however it is manufactured with 34x34mm framing which is much heavier than most buildings of this type. It comes with rustic overlap timber walls, with an 11mm solid sheet OSB floor and 8mm OSB floor.

Four fixed styrene windows are supplied as standard, and they can be fitted to either side.


All sheds in the Shire garden building range are supplied pre-treated inside and out with a quality, water-based, non-toxic, anti-fungicidal base coat. This ensures that your garden building is ready to accept any preservative colour of your choice. A factory-applied preservative topcoat is also available, however this is not a decorative finish.

Doors and Locking System

A single door 650mm wide is supplied with a hasp & staple ready to accept a padlock (not supplied).

Straight-forward Assembly

These Shire Overlap 7×5 Value Apex Sheds are supplied in a flat-pack modular design with smaller panels allowing for easy transportation through your house or garage!  Assembly is straight-forward for the competent DIY’er, and no professional experience is necessary. Normally 2 people can usually complete the job in 2-4 hours.

Optional Extras

This garden building is supplied as a full kit, complete with all necessary fixings, fastenings glazing and roofing materials. The only optional extra available for this model is a pressure-treated timber base c/w adjustable metal spikes.


Model Ref. No. Thickness (mm) Size (mm) Height (mm) Door (mm) Styrene Windows
Wall Framing Width Depth Ridge Eaves Width Height Fixed Open
Shire Overlap 7×5 Value Apex Shed with Windows OVSW0705DOL-1AA 6 34×34 1620 2050 2060 1720 650 1712 4 0
Shire Overlap 7×5 Value Apex Shed without Windows OVSV0705DOL-1AA 6 34×34 1620 2050 2060 1720 650 1712 0 0

Please contact us prior to purchase if you have any queries regarding the dimensions. Information shown above has been supplied by the manufacturer, and is as accurate as possible (errors and omissions excepted), however it is intended only as a guide.

We recommend that you install the building on a solid, free-draining base, with at least 60cm free space all around for maintenance and to avoid splashback. You should treat all sections with a high quality, spirit-based preservative prior to assembly, and subsequently every year in accordance with the manufacturers instructions.

Please ensure that regular general maintenance is carried out on all moving parts, and that the roofing felt is regularly inspected, and replaced if required.